How to modify a fuel filter in small-scale engines?

Quick Links:

  • Where Is My Fuel Filter Located?
  • Finding the Correct Fuel Filter
  • How to Perform Fuel Filter Replacement

Why Should You lot Change the Fuel Filter?

There are many benefits to changing a fuel filter in your modest engine. A fuel filter is designed to properly strain the gas before it reaches the carburetor in your lawn mower, snow blower or equipment.

Fuel filter replacement is important because:

  • It prevents strange particles from clogging your engine
  • Muddied fuel filters can cause your engine to run besides lean, leading to diminished performance and uneven performance

Where is My Fuel Filter Located?

The fuel filter will be located either within the fuel tank or fitted into the fuel line between the tank and the fuel pump. Some engines have internal, not-serviceable fuel filters.

If you are unsure of where your fuel filter is located, refer to your Briggs & Stratton® Engine Operator'southward manual to determine the location.

Finding the Right Fuel Filter for Your Small-scale Engine

The proper fuel filter for your engine depends on the engine's blueprint. Check your engine Illustrated Parts List or consult your local Briggs & Stratton dealer for the correct replacement filter. Once you lot know the correct office, you tin can buy Briggs & Stratton® fuel filters online.

How to Perform Fuel Filter Replacement

Make sure you are in a condom area with no open up flame or fire source. Wear safety eyewear whenever removing or inspecting a filter to protect your eyes from liquid fuel or fuel vapors. Accept a dry textile handy to concord the filter and grab any dripping fuel.

If the filter is installed inside the tank, y'all volition need to drain the tank before yous can remove the filter for inspection or replacement.

  1. Close the fuel valve, if equipped. It's located at the base of operations of the fuel tank, where the gas line is attached. If your tank is not equipped with a valve, clamp the gas line, using a fuel line clamp. Practise not compression fuel line as this could cause impairment to information technology.

  2. If your filter is installed in the fuel line, remove the metal clips on each side of the filter, using needle nose pliers, and slide the filter out of the fuel line.

  3. Shake the filter over a clean material to displace any remaining fuel, and so utilise the fabric to wipe away any residue from the exterior of the filter.

  4. Proceed the filter a safe distance from your face and look through ane end.

  5. You should exist able to see light shining through conspicuously from the other side. If debris is clogging the mesh screen, pleated paper or the inside of the casing, replace the old filter with a new replacement fuel filter.

  6. When replacing the fuel filter, be certain to reconnect the metallic clips on both sides of the filter.

  7. Remove the clamp on the fuel line or reopen the fuel valve when the fuel filter is secure.

  8. Check for leaks. Do not operate the unit if any are plant.

Note: If the fuel line is cracking, supplant fuel line to ensure no leaks, fuel line will break down over time due to the elements.

WARNING: Ever read the engine and equipment manual(southward) before starting, operating, or servicing your engine or equipment to avoid personal injury or holding harm. Come across an authorized dealer if you are unsure of any procedure or have boosted questions.

Shop Related Maintenance Parts